🚀 A Black Friday já começou na PcComponentes! Descobre as ofertas>

🚀 A Black Friday começou! Descobre as ofertas >

PcComponentes
Minha Conta
opiniones/producto
Conversor de disco rígido StarTech 25SATSAS35 de 2,5" para 3,5" SATA/SAS
Conversor de disco rígido StarTech 25SATSAS35 de 2,5" para 3,5" SATA/SAS
24,17€
Recebe-o entre 4ª 11 e 5ª Feira 12 de novembro
Ver produto

Tem uma pergunta para a comunidade?

Se tiver alguma dúvida, não hesite em perguntar a outros utilizadores ou à nossa equipa do centro de apoio para o ajudar a resolvê-la.

Opiniões - Conversor de disco rígido StarTech 25SATSAS35 de 2,5" para 3,5" SATA/SAS

2.9
11 Opiniões
100%
Recomendam11 Recomendações
  • 5
    1
  • 4
    2
  • 3
    4
  • 2
    3
  • 1
    1

Deixe a sua opinião

Vai demorar um minuto, vai ajudar as pessoas a decidir.

Opiniões de clientes

11 opiniões
  • Mais relevantes
  • Mais recentes
  • Mais antigas
e
eddypo
Opinião em destaque
9 anos atrás
Does what I needed it to do I had a spare 2.5 inch hard drive and an open 3.5 inch bay in my desktop. This drive enclosure let me put my 2.5 inch drive into the enclosure and mount it into my desktop as additional storage. The case does feel a bit thin and cheap and the lock fell off the first tim...
Originalmente publicado em Startech
F
FazzaGBR
7 anos atrás
Great for 2.5" SATA but misleading on SAS Great for quickly connecting 2.5" SATA drives so they can be wiped but it's misleading to suggest that this is a SAS to SATA convertor as unless you have a SAS controller they wont work and if you have a SAS controllor you'd surely just connect the SAS har...
Originalmente publicado em Startech
O
Odycanopie5
5 anos atrás
... Instalei o Windows 10 de 64 bits no meu PC. Não encontrei nada sobre a troca a quente (hot swap). No Windows 7 de 64 bits, a troca a quente era realmente possível. Era a coisa mais simples de instalar e usar. Com o Windows 10, preciso desligar o PC, remover o HD instalado, inserir o HD necessári...
Traduzido · 
Originalmente publicado em Startech
B
BDBaer
8 anos atrás
Did not work for me First: could not just slide in the 2.5 drive into the converter, (about 1/2 an inch stuck out the back) in the end I just removed the 8 or 9 screws placed the drive and reassembled the converter. Second: the mounting holes did match the pins on my Dell’s mount.
Originalmente publicado em Startech
r
rowingpeter_s
7 anos atrás
Not the great time saver I was expecting No instructions of any kind ship with this caddy so spent first 1hr trying to slide the SSD onto the connector before closing the lid. Eventually discover that you place the SSD in place and it slides onto the internal connectors AS you close the lid. Once...
Originalmente publicado em Startech
A
Andrew11
9 anos atrás
A little confusing but works (needs instructions) I admit that when I first got this out of the box, I didn’t know how to open the flap to access the inside of the adapter. I am not sure what symbol would have triggered my brain to pull the release catch outward, but the symbol on it just didn’t c...
Originalmente publicado em Startech
m
macphot1970
9 anos atrás
Nice adapter - simple build quality This is a good quality adapter to take 2.5 drives to 3.5. I don't think the design is bad at all but the build of the unit feels cheap compared to some of the other adapters I have had. The performance of the adapter is great and can not be faulted at all. ...
Originalmente publicado em Startech
N
Nick71
9 anos atrás
Solid performance, not so solid build. OK, so I tried to use it internally, but the mount holes don't line up at all (can't move it forward or back in the Lenovo or CoolerMaster case internal positions I tried since they use plastic spacers that fit into the drive holes, which of course, don't lin...
Originalmente publicado em Startech
h
hospitaltech474
10 anos atrás
Mounting holes are incorrect We purchased 10 of these only to find out that the side mounting holes do not line up with the side mount holes on a standard 3.5" HDD. This is turn made them useless for upgrading our HP AIO because the HDD caddy is made to line up with a standard HDD mounting points....
Originalmente publicado em Startech
N
NickD_CA28
9 anos atrás
Cheap but works The hard drive adaptor has been working well for me but physically very cheap and with limited mounting options, could be better. The hard drive adaptor comes in a box just barely bigger than 3.5 inch hard drive. It is made of all black plastic and raddles like there are loose pa...
Originalmente publicado em Startech
N
Nivek
9 anos atrás
Works Well This is a decent product. I used it to put a 2.5 SSD in my tower workstation. It fit and worked well.
Originalmente publicado em Startech
Opinião confirmada
A nossa etiqueta de "opinião confirmada" garante que esta avaliação pertence ao mesmo utilizador que efectuou a compra do produto no nosso sítio Web. Verificamos a autenticidade das compras e das respectivas avaliações para garantir que as avaliações assim rotuladas são exactas e fiáveis.
24,17€
Ver produto
Filtros
Apenas avaliações de compras verificadas
Apenas as opiniões de Portugal